Black Widow 1R / 2-BUTTON SERIES Uživatelský manuál stáhnout pdf (Strana 2)

2

PASSIVE ARMING

The passive arming feature allows the system

to arm automatically without user

intervention.The passive arming feature also

allows the system to automatically re-arm

itself in the event the system is disarmed and

the ignition is not turned on within 30

seconds. The Passive Arming feature may be

enabled during installation.

To arm the system passively:

1. Turn the ignition key off.

2. Exit the vehicle and close all doors.

• The LED flashes rapidly indicating

that the system is preparing to arm.

(The system can be armed at any

time by pressing transmitter button

1.)

• If the passive arming with countdown

chirps feature is selected during

installation, the siren will chirp every

2 seconds until armed.

• The siren will chirp 30 seconds after

the last door is closed to indicate the

system is now armed.

• The doors will lock.†*

† If Passive Locking was enabled during installation.

DISARMING OPERATION

To disarm the system press transmitter

button 1.

• The siren will chirp twice.

• The parking lights will flash twice.*

• The doors will unlock.*

• The dome light will turn on for 30

seconds.*

TAMPER ALERT

If the alarm was triggered while away, the

siren will chirp and the parking lights will

flash 3 times on disarming for tamper

indication.

SILENT ARMING/DISARMING

Press transmitter button 2 to Arm or Disarm

silently for one-time operation. The system

can also be programmed for full-time silent

operation during installation.

IGNITION LOCK*

The ignition locking feature automatically

locks the doors 5 seconds after the ignition

key is turned on, and automatically unlocks

when the ignition key is turned off. To avoid

locking keys in the vehicle, the ignition

locking feature will be cancelled if a door is

open when the ignition is turned on. This

feature may be disabled during installation.

REMOTE PANIC

In the event of an emergency (PANIC)

situation, the system’s siren can be triggered

for 30 seconds to attract attention.To activate

the Panic Feature, press transmitter button 1

for 3 seconds:

• The siren will sound.

• The parking lights will flash*.

Press button 1 again to exit panic mode.The

Panic Feature will not operate when the

ignition is on.

*

Optional feature

EMERGENCY OVERRIDE

If the transmitter becomes lost or fails to

operate, the system can be disarmed by

using the emergency override feature.

To override the system:

1. Enter the vehicle.

• Because the system is armed, the

siren will sound.

2. Turn on the ignition key.

3. Press the Valet switch for 3 seconds.

• The siren will stop sounding.

• The starter defeat will be bypassed.

• The system will enter valet mode.

BW1900.qxd 7/1/2005 4:16 PM Page 2

1 2 3 4 5 6 7 ... 15 16

Komentáře k této Příručce

Žádné komentáře